1.MIKROSA KRONOS S
MIKROSA KRONOS-precision grinding of small parts of the economic ideal for small precision parts processing system.
No mechanical adjustment components, precision set by the NC a 'and B1, significantly improve productivity, reduce time to adjust and replace tools.
Set by the workpiece support and guide wheel dresser to achieve high-precision finishing.
Replaced by two hours grinding spindle, can be quickly replaced into 15-degree tilt of the plunge-cut grinding.
Horizontal axis slide system, -4, 7-axis with the other as agile.
Water-cooled drive motor
2.MIKROSA KRONOS M3
KRONOS M series of modular design with the best projects for different grinding process adaptability.
Configuration of high-precision roller bearings can achieve normal grinding wheel spindle speed 63M / S. The hybrid ceramic bearing configurations can achieve the grinding wheel grinding wheel spindle speed 120M / S, resulting in high-speed grinding with CBN under the conditions of reduced processing cycle time, to ensure that customers get even more impressive gains.
Shaft of CNC machine tools such as programmable incremental 0.1um.
Feasible process
Cross-type grinding
Plunge-cut grinding
Full-size radial and face grinding
Multi-piece cut grinding
Axial face grinding or grinding with the move
3.MIKROSA KRONOS L660
KRONOS L660-performance grinding machine for large parts
KRONOS L 660 good rigidity, dynamic stability, and flexibility make it particularly suitable for large workpieces. The machine through a series of technical innovations and improvements: such as the internal cutting fluid diversion tool, coolant return, internal grinding machine, and the overall protection of space static and dynamic pressure grinding wheel spindle and guide wheel spindle.
In addition, the wheel side and the side rails of the rail feed by servo motor and backlash-free ball screw to achieve the pre-tightening. Meanwhile, the standard of the linear encoder systems to ensure the positioning accuracy.
Feasible process
Cross-type grinding
Plunge-cut grinding
Suitable for mass production model to cut into the grinding
4.MIKROSA KRONOS speed
KRONOS speed - speed grinding of small parts
KRONOS speed KRONOS S 125-based platform, but greatly reduces the workpiece loading and unloading time.
Workpiece change time can be controlled in less than 1 second (depends on the application site)
Integrated high-speed centerless grinding up and down the feed mechanism (HSCL)
With the flow from the workpiece support upgrade of the patent board
Apply to the use of duplex-bit single / two-piece or continuous process production
The use of cutting oils and emulsions can be
Limit the use of the workpiece material rail to ensure the safety of feeding
Lock the workpiece feed trough
5.MIKROSA KRONOS K
KRONOS K --- for the special tapered roller processing machine
The machine is based KRONOS M 400 platform, designed for grinding through the cone-type sub-radial design. The device does not use lead-wheel-drive parts, but equipped with tapered roller size to fit the feeding worm transmission parts.
Wheel spindle bearing support at both ends of double-
Feeding the worm ends of double-bearing support
Cone angle correction method is simple
6.MIKROSA KRONOS dual
KRONOS dual --- top with a combination of grinding and centerless grinding
Centerless grinding and grinding with the top to create a KRONOS dual combination machine with a realization of the centerless grinder top grinding possible. This piece can be used again after centerless grinding two-piece top-center of the benchmark to determine the requirements to complete the processing.
KRONOS dual its excellent cutting efficiency and ensure the centerless grinding machine with a combination of the top grinding cycle time reduction. From the machine in terms of the concept of platform-based KRONOS L 660 of such modular machines through its existing strengths and to increase the grinding technology with top-greater economic benefits.
